PABCORE® Shaftliner

Primary Uses
- For use in one or two-hour shaft wall systems
- For use in one or two-hour horizontal ceiling systems
- Two-hour Area Separation Wall
PABCORE® Shaftliner Type X panels are manufactured with a proprietary fire resistant Type X core which has been reinforced with glass fibers and other additives to increase its fire resistance. This core is encased in 100% recycled water resistant paper, and features a double beveled edge.
Made in the USA
Core | Thickness | Width | Length | Edge | Weight |
---|---|---|---|---|---|
PABCORE® SHAFTLINER Type X |
1” (25.4 mm) | 24” (609.6 mm) | 8’ (2334 mm) 10’ (2334 mm) 12’ (3658 mm) |
Double Beveled | 4.4 lbs/ft2 |
Composition:
Core: 1” Type X (UL Core Type: PG-10) Gypsum Core
Paper: 100% recycled content paper on front, back and long edges
ASTM C1396, Federal Specification SS-L-30D Type VI & Grade X
PABCO Gypsum Installation Instructions
Gypsum Association GA-214, GA-216
ASTM C840
<10%
Flame Spread 15
Smoke Developed 0
Non-Combustible
Sustainably manufactured in Las Vegas, NV from raw material extracted from the same location. For a full analysis of LEED credits, sustainable attributes, and other environmental certifications, please see our LEED Credit Calculator Tool.
Recycled Content Credit MR4:
Pre Consumer Recycled Content | Post consumer Recycled Content | Total Recycled Content |
---|---|---|
9% |
1% |
10% |
Regional Materials Credit MR5:
Manufacturing Plant Location | Regional Materials | Raw Materials Extraction Location |
---|---|---|
Las Vegas, NV, USA |
94% |
Las Vegas, NV, USA |
Newark, CA, USA | 90% | Mexico |