PABCO Regular Gypsum Board

Primary Uses

  • Interior,  Non-structural, non-fire rated walls, ceilings and partition applications
  • New or renovation projects with frame spacing not more that 24 inches on center
  • Wall covering material for flat or curved walls
  • May be formed into a curve on a short radius

PABCO® Regular Gypsum Drywall is an interior panel composed of a naturally noncombustible, dimensionally stable, gypsum core.  The core is wrapped in high quality 100% recycled facing and backing paper that will accept most decorative finishes.  Regular Gypsum Wallboard is intended for non-fire rated residential construction.
 
Made in the USA

Core Thickness Width Length Edge Weight
Regular 1/4” (6.4 mm) 48” (1219 mm) 8’   (2334 mm)
12’ (3658 mm)
Tapered 1.1lbs/ft2
Regular 3/8” (9.5 mm) 48” (1219 mm) 8’   (2334 mm)  Tapered 1.3lbs/ft2
Regular 1/2” (12.7 mm) 48” (1219 mm) 8’   (2438 mm)
9’   (2743 mm)
10’ (3048 mm)
12’ (3658 mm)
14’ (4267 mm)
15’ (4572 mm) 
Tapered 1.5lbs/ft2
Regular 1/2” (12.7 mm) 54” (1372 mm) 10’ (3048 mm)
12’ (3658 mm)
Tapered 1.5lbs/ft2

Composition:

Core: Regular Gypsum Core, UL Core Type Regular
Paper: 100% recycled content paper on front, back and long edges

Manufactured:

ASTM C1396, Federal Specification SS-L-30D
Type III & Grade R

Installation:

PABCO Gypsum Installation Instructions
Gypsum Association GA-214, GA-216
ASTM C840

Surface Burn ASTM E84:

Flame Spread 15
Smoke Developed 0

Combustibility ASTM E136:

Non-Combustible

See the Gypsum Association Fire and Acoustic Guide GA-600

Underwriters Laboratories, UL fire Resistance Directory

Sustainably manufactured in Las Vegas, NV from raw material extracted from the same location. For a full analysis of LEED credits, sustainable attributes, and other environmental certifications, please see our LEED Credit Calculator Tool.

Recycled Content Credit MR4:

Pre Consumer Recycled Content Post consumer Recycled Content Total Recycled Content

7% - 12%

1%

8% - 14%

Regional Materials Credit MR5:

Manufacturing Plant Location Regional Materials Raw Materials Extraction Location

Las Vegas, NV, USA

90% - 94%

Las Vegas, NV, USA

Newark, CA, USA 90% Mexico