PABCO® Impact Resistant
Primary Uses
- Interior walls where surface durability against abrasions and surface indentation is necessary
- High humidity interior areas where enhanced mold and moisture protection is needed on wall and ceiling applications
- High traffic interior walls such as corridors in schools, hospitals, offices and courthouses and correctional facilities
- Not intended for areas where constant or excessive moisture is present such as showers, steam rooms or saunas
- New or renovation projects with frame spacing not more than 24 inches on center
PABCO® Impact Resistant Drywall panel is a true super panel: Type X fire-resistant, mold-resistant, water-resistant, abrasion resistant and impact resistant. PABCO® Impact Resistant is manufactured with a proprietary high density fire resistant Type X core that incorporates an embedded fiberglass mesh to further enhance impact resistance.
Made in the USA
| Core | Thickness | Width | Length | Edge | Weight |
|---|---|---|---|---|---|
| Impact Resistant Type X |
5/8” (15.9 mm) | 48” (1219 mm) | 12’ (3658 mm) | Tapered | 2.9lbs/ft2 |
Composition:
Core: 5/8” Type X (UL Core Type: PG-5W) Gypsum Core
Paper: 100% recycled content heavy mold/mildew/moisture/water and abrasion-resistant paper on front, back and long edges
ASTM C1396, ASTM C1629, Federal Specification SS-L-30D Type III & Grade WX
PABCO Gypsum Installation Instructions
Gypsum Association GA-214, GA-216
ASTM C840
Classification Level 2
Classification Level 1
Classification Level 3
Classification Level 3
10 (Highest Rating)
≤5% by weight
Flame Spread 15
Smoke Developed 0
Non-Combustible
Sustainably manufactured in Las Vegas, NV from raw material extracted from the same location.
For additional LEED and sustainability information, please contact PABCO Gypsum Technical Services.