PABCO FLEX

Primary Uses
- Single layer curve on a short radius
- Mold-resistant paper and core allow panel to be thoroughly wetted and formed
- Interior wall and ceiling applications
- New or renovation projects with frame spacing not more that 24 inches on center
- Wall covering material for flat or curved walls
PABCO FLEX™ gypsum panels are ideal for concave and convex surfaces in walls and ceilings. The unique thickness of our PABCO FLEX™ Drywall allows you to create a curved wall with a single layer application and feather the finish into an adjoining flat wall surface.
The PABCO® Regular Gypsum Drywall family of products features naturally noncombustible, dimensionally stable, gypsum core. The core is wrapped in high quality 100% recycled facing and backing paper that will accept most decorative finishes. Regular Gypsum Wallboard is intended for interior, non-fire rated residential construction.
Made in the USA
Core | Thickness | Width | Length | Edge | Weight |
---|---|---|---|---|---|
Table | 3/8” (9.5 mm) | 48” (1219 mm) | 12’ (3658 mm) | Tapered | 1.3lbs/ft2 |
Composition:
Core: Regular Gypsum Core, UL Core Type Regular
Paper: 100% recycled content paper on front, back and long edges
ASTM C1396, Federal Specification SS-L-30D Type III & Grade R
PABCO Gypsum Installation Instructions
Gypsum Association GA-214, GA-216
ASTM C840
Flame Spread 15
Smoke Developed 0
Non-Combustible
See the Gypsum Association Fire and Acoustic Guide GA-600
Underwriters Laboratories, UL fire Resistance Directory
Sustainably manufactured in Las Vegas, NV, and Newark, CA.
LEED and sustainability information: