Gypsum
Ceiling
Board		 FLAME
CURB®
Type C		 FLAME
CURB®
Type XXX		 FLAME
CURB®
Type X		 WATER
CURB® 		WATER
CURB®
Type X		 MOLD
CURB®
PLUS		 Sheathing
Panel		 Sheathing
Panel
Type X		 PABCORE® Shaftliner Regular
Core		 Exterior Soffit Board
Gypsum Ceiling Board FLAME CURB® Type C FLAME CURB® Type XXX FLAME CURB® Type X WATER CURB® WATER CURB® Type X MOLD CURB PLUS™ Sheathing Panel Sheathing Panel Type X PABCORE Regular Core Tape Exterior Soffit Board
PABCO® Gypsum Sheathing Panel Label

MSDSGypsum Sheathing Panel

PABCO® Gypsum Sheathing Board is a treated core moisture-resistant product and is designed for use as an exterior substrate product that provides a stable base for most types of finish cladding. PABCO® Gypsum Sheathing Board has a water-resistant core and water-repellent paper (brown face paper and gray back) both treated chemically to provide a water-repellent surface.

PABCO® Gypsum Sheathing Board is manufactured in 4 ft. wide and 8 ft. long panels. The sheathing panels are manufactured with square edges. These square edges are not designed for finishing with joint compound and tape. PABCO® Gypsum Sheathing Board is manufactured in 1/2" treated regular core and 5/8" treated type X core.

PABCO® Gypsum Sheathing Board panels are flexible, may be attached with nails, screws or staples. The gypsum core provides natural resistance to the spread of fire.

1/2" PABCO® Gypsum Sheathing Board treated regular core gypsum sheathing board is recommended for use in residential or commercial buildings and may be required where fire rated systems are specified. 1/2" PABCO® Gypsum Sheathing Board treated regular core is commonly used under 3/4" drop siding to provide a one-hour fire-resistive wall assembly.

1/2" PABCO® Gypsum Sheathing Board treated regular core meets the requirements specified by ASTM in the Standard Specification for Gypsum Board (C 1396) for water-resistance and surface water absorption.